Crystals are supported on a 3 μm thick film held in place by a 10 μm thick body this provides for:

• ultra-low background scatter
• minimized liquid thickness in the aperture
• easy crystal visualization through the thin polymer membrane
• reduced liquid thickness in the apertures
• reduced optical distortion at apertures
• easier aligment both normal to and perpendicular to e X-Ray beam
• ultra-low motion in the cryostream

These ultra-transparent mounts meet the challenges of visualizing, aligning, and collecting diffraction data from micron size crystals. Using dual-thickness technology, crystals are supported on a 3 micron thick film in a 10 micron thick frame. An aerodynamic design combined with a reduced tip length minimizes sample motion. MicroCrystal Mounts provide an unsurpassed combination of X-Ray transparency and rigidity.

Each design is currently available in two versions: one with a smooth top surface and the 10 micron thick outer “rib” on the bottom surface, and one with the outer rib projecting out on the upper surface.

Models with an outer rib on the top harvest surface:

“Smooth Top” models with smooth top harvest surface, and outer rib on the bottom surface:

MicroCrystal Mounts™ 作为一个分类出售，由两个单独的盒子中的 24 个引脚组成。 它包括每个模型的 2 个引脚。

MicroCrystal Mounts™ 建立在 18 mm / SPINE 长度的杆（销）上，现在世界上几乎所有同步加速器光束线都是标准配置。 也可提供其他引脚长度：（11 毫米、19 毫米和 25 毫米）

我们强烈建议使用重型锯齿尖镊子来处理 MicroCrystal Mounts™。

MicroCrystal Mounts™ 与所有标准 X 射线硬件兼容，可以插入 0.7 毫米自动铅笔或显微操作器中以便于操作。

Cleaning for reuse

Technotes

Impact of Crystal mounting method

Use the Mount Selection Guide to find the right choice for your needs.

For pin lengths other than 18 mm visit our Non-Standard Pin Length page

Angled Tip Options are also available.